Investigation of the microstructure and mechanical properties In friction stir welded is similar aluminium alloy joints via Sampling direction

Abstract

This research study investigates the influence of sampling direction on the microstructure and mechanical properties of dissimilar joints formed by friction stir welding (FSW). The specimens were cut in two directions: perpendicular (transverse) and parallel (longitudinal) to the FSW joint. The tests conducted included X-ray diffraction (XRD), macrostructure, microstructure, tensile, microhardness, and fractography analysis. Different phases were noted in the XRD patterns and explained, with the aluminum phase being the dominating one. The results further showed that the transverse dissimilar joint exhibited higher microhardness compared to the longitudinal dissimilar joint, which is consistent with the respective grain sizes. Moreover, the ultimate tensile strength of the longitudinal joint exceeded that of the transverse joints, showing a substantial 47% increase. Similarly, the elongation of the joints followed a similar trend, with the longitudinal joint displaying a significant 41% increase in elongation compared to the transverse joint. Fractographic analysis revealed ductile fracture behaviour in all joints.